Shading ON CEMENT SURFACES: FINISHED IN CONCRETE(μονωσεις ταρατσων)
Surface treated with darker surface color. Concrete arranged with dim cement, dark smashed TMN 3/8 "and dim sand
The dyes are not a paint for concrete , but rather a surface color that produces a concoction response with the cement of the concrete , which makes the shading to be sturdy after some time.
This sort of item does not change the physical-compound properties of the concrete , however it must be considered that the item responds as indicated by the qualities of the concrete , hence it is key to do fundamental tests to watch the tonalities that can be gotten.
Finishing with surface dyes can be utilized on floors, inside and outside dividers, to accomplish hued concrete paying little heed to the age of the concrete or to mimic some material, for example, stone or marble.
In like manner, examples or layouts can be utilized to accomplish shaded figures on the surfaces . The dyes come in various introductions and of changed hues, both shiny and matt surfaces can be accomplished. The shallow deformities that the concrete presents are not covered up with the color , in light of the fact that it doesn't fill or fill, in spite of the fact that they can be dissimulated or complemented by the shading.
Execution conceivable outcomes
This strategy can be completed on both vertical and even surfaces.
Materials, gear and instruments for finishing
Surface color for concrete of the chose tone.(παλετοφορα)
Surface sealer
Brushes, tow, rollers or plastic sprinklers for the utilization of the color.
dyes in concrete
Surface ground and treated with darker surface color. Concrete arranged with dark cement, dim smashed TMN 3/8 "and dim sand
General conditions
1. It is basic that the surface to be colored is no less than 14 days after the concrete has been discharged and that it is dry .
2. The surface to be colored must be free of sealants, paints, discharge operators, relieving specialists or any operator that keeps the contact of the color with the concrete .
3. The cleaning of the surface must be finished with water or concentrated items, never with concoction specialists that contain acids.
4. This kind of complete is usually joined by a sealant, with which the shading is required to last after some time ; there are numerous in the market, so your decision relies upon the need of each undertaking, they can be matt or splendid.
Typically two hands ought to be connected, the primary utilizing the item weakened in the dissolvable indicated by each brand and the second unadulterated. The utilization of the sealant ought to be done when the surface is totally dry.
5. By and large the unadulterated item is utilized with regards to unglazed surfaces and in two layers when it is enameled . The first, weakened in water in a color water proportion of 1: 2; the second layer, with unadulterated color. Nonetheless, proposals may shift contingent upon the supplier or the item utilized.next blog